Product Library
DefiXpress Defibrillator Technical Specification
Meditech Debrillator Monitor can work both in Automated External Debrillator (AED) mode and Manual mode and record parameters of ECG, HR and SpO2. Features: ·
Works both in automated external debrillator (AED) and Manual modes · Records ECG, HR and SpO2 · It has voice and visual prompts for charge prompt and shockable rhythm · It has a high-resolution display and a thermal printer
|
Display:
|
7 screen(17.7cm)diagonally
|
|
Sweep speed:
|
25mm/ sec
|
|
Number of leads for ECG:
|
3-lead ECG cable or 5-lead ECG cable, paddles
|
|
Output:
|
Biphasic
|
|
Energy sequence:
|
Monitor display indicates both selected and delivered energy
|
|
Charge time:
|
<7sec with a new fully charged battery
|
|
Charge prompts:
|
Voice and visual prompts
|
|
Electrode impedance measurement range:
|
0-250Ω
|
|
Lead selection:
|
Displayed on monitor, paddles, I, II, III, AVR, AVL, AVF, V
|
|
ECG size:
|
0.25, 0.5, 1, 1.5, 2, 4 cm/mV display on monitor
|
|
Heart rate:
|
20-300bpm
|
|
Heart rate alarm:
|
On/Off displayed on monitor, user-selectable
|
|
Smart alarm:
|
Beeper/voice prompts indicate shockable rhythm
|
|
SpO2 measurement range:
|
30~100%, ±2% between 80%~90%, others ±5%
|
|
Alarm range for SpO2 measurement range:
|
User set high limit and low limit
|
|
Alarm accuracy for SpO2 measurement range:
|
±10% within setting values
|
|
Alarm time accuracy for SpO2 measurement range:
|
Less than 12secs
|
|
Functions of AED mode:
|
Auto analyse and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts
|
|
Shockable rhythms of AED mode:
|
Ventricular fibrillation with amplitude >=200uV ventricular tachycardia with rates >=140bpm QRS complex wave duration >=140ms
|
|
Charge control of AED mode:
|
Control on device front panel, press key on paddle
|
|
Prompts of AED mode:
|
Voice and visual prompts
|
|
Energy selection of Manual mode:
|
Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules
|
|
Synchronization of Manual mode:
|
Synchronizes defibrillator pulse to patient's R-wave. ”SYNC” message displayed on monitor
|
|
Printer paper:
|
50mm thermal paper
|
|
Paper speed:
|
12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay
|
|
Printing method:
|
High-resolution, thermal print head
|
|
Print-out modes:
|
Manual or automatic, user-configurable
|
|
On/Off control:
|
Front panel and paddle
|
|
Automatic function:
|
9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge
|
|
Battery:
|
Rechargeable, Ni-MH battery, 12V
|
|
Battery life:
|
For a new, fully charged battery- 60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions
|
Promoted Products
Meditech Brands
Meditech Equipment Co.,Ltd is part of Meditech Group. Product(s) described may not be licensed or available for sale in all countries. Sonotech, Sonovet, iSonic, FOs2pro, Dolphi, Defi, HeartRec,miniScan,Cardios,SpirOx,iBreath, Meditech and all corresponding design marks are trademarks of Meditech. The symbol indicates the trademark is registered. Patent and Trademark Office and certain other countries. All other names and marks mentioned are the trade names, trademarks or service marks of their respective owners. Please see the Instructions for Use for a complete listing of the indications, contraindications, warnings and precautions.
Legal notice Terms and conditions Cookie policy Privacy Policy Professional organisations Careers