• ET3 Capnograph
MD ET3 Meditech Mainstream CO2 Sensor is designed for mainstream measurements using sophisticated infrared absorption spectroscopy to measure ETCO2 with mainstream,

Product Features

    Preferred choice for intubated patients
    Rugged solid state with no moving parts
    Lightweight & compact design
    Fast accurate on airway measurement
    No calibration required
    Disposable & reusable airway adapters for all patients
    Private label option

Product Specifications

    Transducer Type Mainstream CO2 Sensor
     Principle of Operation Infrared Spectroscopy
    Energy Emitting Device Proprietary High Efficiency IR Source
    Energy Detecting Device Frequency Stable Thermopile
    CO2 Measurement Range 0% to 20%
    CO2 Resolution 0.1 mm Hg 0 to 49 mm Hg 0.2 mm Hg 50 to 150 mm Hg
    CO2 Accuracy  ±2 mm Hg  @ < 5.0% CO2 (at BTPS) < 10% of reading @ > 5.0%CO2(at BTPS)
    Dimensions 50mm*22mm*36mm
    Weight   < 40g
    Breath  Rate Range 2 to 150 Breaths Per Minute (BPM)
    Respiratory Rate Accuracy ±1 breath
    Calibration No routine user calibration required, but module can be calibrated by user
    Data Interface Highly configurable serial digital interface (TTL/RS232 Level)
    Data Output CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory Rate.
    Input Voltage  5.0 VDC ±5%
    Power Consumption 400mW
    Warm-up Time  10 seconds
    Response Time  Detector: 20mSec (Typical)
       System: 200mSec(Typical)
    Operating Temperature 5℃ to 50℃
    Shipping/Storage Temperature Range  -40℃ to 70℃
    Interconnection Standard Lemo Redel 8-pin plastic  Material PSU  Sensor Plug: PAB.M0.8GL.AC39GZ  Band Relief: GMA.1B.030.DJ  Host Receptacle: PKB.M0.8GL.LJ Note: Pin out: 1 VA 5.0V  2 Shield Shield  3 DGND Digital return  4 VA 5.0V  5 TxD Serial data from the Module 6 RxD Serial data from Host  7 AGND Analog return  8 NC
    Shock Impact IEC TR 6 0721-4-7 Class 7M3 (designed to withstand environments subject to significant vibrations or high shock levels) EN6 0068-2-27 Shock EN60068-2-64 Random vibration
    Regulatory Designed to meet IEC 6 0601-1-2 , EN55011 .CISPIR 11 Class B (Radiated and Conductive Emissions), IEC 6 1000-4-2 Electrostatic Discharge Immunity, IEC 6 1000-4-3 Radiated Immunity, Designed to comply with 93/42/EEC (MDD CE Marking), FDA Standards, Minimum Performance and Safety Requirements for Comptometers and ISO21647. Medical Electrical Equipment performance requirements for the basic safety and essential performance of respiratory gas monitors.

Related Accessories

Related Products

Promoted Products

Meditech Equipment Co.,Ltd is part of Meditech Group. Product(s) described may not be licensed or available for sale in all countries. Sonotech, Sonovet, iSonic, FOs2pro, Dolphi, Defi, HeartRec,miniScan,Cardios,SpirOx,iBreath, Meditech and all corresponding design marks are trademarks of Meditech. The symbol indicates the trademark is registered. Patent and Trademark Office and certain other countries. All other names and marks mentioned are the trade names, trademarks or service marks of their respective owners. Please see the Instructions for Use for a complete listing of the indications, contraindications, warnings and precautions.

Legal notice Terms and conditions Cookie policy Privacy Policy Professional organisations Careers

2021© Copyright احدى فروع شركة ميديتك جروب و المركز الرئيسي الإقليمي لمنطقتي الشرق الأوسط و شمال إفريقيا | Meditech Group (Middle East branch).

Meditech Group

To Top